No, there are hundreds of places in Vensim where you can select text, that's why I asked for more info.
Search found 4592 matches
- Wed Mar 27, 2024 1:36 pm
- Forum: Vensim
- Topic: double-click selection
- Replies: 5
- Views: 2974
Re: double-click selection
- Tue Mar 26, 2024 1:06 pm
- Forum: System Dynamics Discussion
- Topic: Cumulative flow does not match stock
- Replies: 2
- Views: 2849
Re: Cumulative flow does not match stock
1. Does your model pass the units test?
2. Have you selected an appropriate time step? https://www.vensim.com/documentation/ref_time_step.html
It's impossible to comment further without the model.
2. Have you selected an appropriate time step? https://www.vensim.com/documentation/ref_time_step.html
It's impossible to comment further without the model.
- Mon Mar 25, 2024 9:09 pm
- Forum: Vensim
- Topic: double-click selection
- Replies: 5
- Views: 2974
Re: double-click selection
Can you provide more detail please? Where are you clicking things? Can you give an example?
- Mon Mar 25, 2024 6:58 pm
- Forum: Vensim
- Topic: Lables on Flows
- Replies: 2
- Views: 1549
Re: Lables on Flows
We'll get this fixed as soon as possible.
- Sat Mar 23, 2024 8:55 pm
- Forum: Vensim
- Topic: Vensim 8.0.0 download
- Replies: 3
- Views: 1667
Re: Vensim 8.0.0 download
8.0.0 does not even run on modern Macs, you are best off using the latest version.
- Sat Mar 23, 2024 6:27 pm
- Forum: Vensim
- Topic: Floating Point Error
- Replies: 3
- Views: 1638
Re: Floating Point Error
To give you a little more help, try this burning of coal = min ( available coal resources / time step , base burning rate ) This equation burns the "base burning rate" until all the "available coal resources" are used up. This equation takes "base burning rate" from the...
- Sat Mar 23, 2024 6:24 pm
- Forum: Vensim
- Topic: Floating Point Error
- Replies: 3
- Views: 1638
Re: Floating Point Error
You do have units errors in your model.
Start with "base burning rate". That should not be measured in 1/year, I'm pretty certain it will be tonnes/year. Same for "base discovery rate". Correct the units for these, and you'll see where the error is.
Start with "base burning rate". That should not be measured in 1/year, I'm pretty certain it will be tonnes/year. Same for "base discovery rate". Correct the units for these, and you'll see where the error is.
- Sat Mar 23, 2024 7:41 am
- Forum: Vensim
- Topic: it is frustrating!
- Replies: 25
- Views: 3928
Re: it is frustrating!
All I did was put the graph onto the sketch using the IO tool.
- Thu Mar 21, 2024 9:17 am
- Forum: Vensim
- Topic: it is frustrating!
- Replies: 25
- Views: 3928
Re: it is frustrating!
Try the attached.
- Wed Mar 20, 2024 2:51 pm
- Forum: Vensim
- Topic: Vensim 8.0.0 download
- Replies: 3
- Views: 1667
Re: Vensim 8.0.0 download
All you can use is the latest version.
- Tue Mar 19, 2024 12:01 pm
- Forum: Vensim
- Topic: it is frustrating!
- Replies: 25
- Views: 3928
Re: it is frustrating!
1. there is a problem with the function under "plant growth", I can´t solve. You used "[" and "]" for brackets, you cannot do that unless working with subscripts. Change the equation to growth rate*consumption level*Environmental pollution*(1-(consumption level*Environ...
- Mon Mar 18, 2024 8:42 am
- Forum: Vensim
- Topic: publishing a model independently from its directory
- Replies: 3
- Views: 1566
Re: publishing a model independently from its directory
It should be independent of the folder. But it's impossible to help further without a published model to look at. If you have hard coded the path to a spreadsheet in the model, then that would cause this problem.
- Mon Mar 18, 2024 8:41 am
- Forum: System Dynamics Discussion
- Topic: Request of SD advice - Ph.D Thesis results
- Replies: 5
- Views: 1761
Re: Request of SD advice - Ph.D Thesis results
There are two things I do not like to see when reading papers. 1. Models that have unit errors or missing units. I immediately assume the model is full of errors. If the model cannot past this basic check, then it suggests to me that the author has not taken the time to make sure things are correct ...
- Mon Mar 18, 2024 8:37 am
- Forum: Vensim
- Topic: it is frustrating!
- Replies: 25
- Views: 3928
Re: it is frustrating!
Same answer as before, it's impossible to say anything as you haven't uploaded the model. We cannot possibly know why the lines are not moving without seeing the model.
- Wed Mar 13, 2024 4:22 pm
- Forum: Vensim
- Topic: Copy & Paste between models
- Replies: 4
- Views: 2439
- Wed Mar 13, 2024 7:20 am
- Forum: Vensim
- Topic: Problems with MCMC and optimize payoff
- Replies: 1
- Views: 1504
Re: Problems with MCMC and optimize payoff
We would need the model and VPD file to offer any help. There is clearly an error in that file.
- Tue Mar 12, 2024 3:13 pm
- Forum: Vensim
- Topic: Sensitivity simulation - changing the file output format
- Replies: 1
- Views: 1453
Re: Sensitivity simulation - changing the file output format
1/Is it possible to obtain a "*_sens_trace" file with variables in columns? Not any more. You can easily do what you need in Excel though. 3/About the .cin file, I suppose it is an error log, but what type of errors are highlighted? I only see variables equal to a specific value, but I do...
- Tue Mar 12, 2024 2:42 pm
- Forum: Vensim
- Topic: Help with PULSE TRAIN and random variable
- Replies: 6
- Views: 2067
Re: Help with PULSE TRAIN and random variable
SAMPLE IF TRUE will hold a value until something is "true". So create a variable that equals 1 every 365 days, and use that in the call to SAMPLE IF TRUE.
- Sat Mar 09, 2024 3:51 pm
- Forum: Vensim
- Topic: it is frustrating!
- Replies: 25
- Views: 3928
- Sat Mar 09, 2024 1:23 pm
- Forum: Vensim
- Topic: it is frustrating!
- Replies: 25
- Views: 3928
Re: it is frustrating!
Click the Options menu on the graph, then "Number lines".
- Sat Mar 09, 2024 8:28 am
- Forum: Vensim
- Topic: Help with PULSE TRAIN and random variable
- Replies: 6
- Views: 2067
- Sat Mar 09, 2024 8:28 am
- Forum: Vensim
- Topic: Optimization with wrong subscripts error
- Replies: 4
- Views: 1531
Re: Optimization with wrong subscripts error
I'll see if I can improve the error reporting. Maybe if I just change ERROR: Cannot find constant in model To one of the following depending on what is in the optimization control file. ERROR: Constant not found in model, cannot continue. or ERROR: Constant found in model, but no subscripts in optim...
- Fri Mar 08, 2024 3:45 pm
- Forum: Vensim
- Topic: Feature request: make loop polarity direction indicator vector graphics
- Replies: 4
- Views: 1816
Re: Feature request: make loop polarity direction indicator vector graphics
The old GUI is no longer supported. The new GUI already does quite a lot more than the old (such as vector graphics).
You can also find a SVG of the image you want, save it to the model folder and use that as an image.
You can also find a SVG of the image you want, save it to the model folder and use that as an image.
- Fri Mar 08, 2024 2:08 pm
- Forum: Vensim
- Topic: Explicit Stock-Flow Structure of the Pink Noise
- Replies: 1
- Views: 1342
Re: Explicit Stock-Flow Structure of the Pink Noise
It comes from Tom's blog, but I think there was a slight modification before we put it directly into Vensim. https://metasd.com/2010/03/pink-noise/ :MACRO: RANDOM PINK NOISE(mean, std deviation, correlation time, seed) RANDOM PINK NOISE = INTEG(updating pink noise,mean+std deviation*RANDOM NORMAL(-6...
- Fri Mar 08, 2024 8:15 am
- Forum: Vensim
- Topic: Optimization with wrong subscripts error
- Replies: 4
- Views: 1531
Re: Optimization with wrong subscripts error
Do you have an example you can provide? I can probably make changes very quickly.