Strange Problem: Missing Model
-
- Junior Member
- Posts: 8
- Joined: Sun Sep 02, 2018 4:03 am
- Vensim version: PLE
Strange Problem: Missing Model
Hi,
I have been working long time to generate a model. This model have been saved into several different versions (increment change in each model). I always back up my file in google drive stream, and have no problem. Recently I changed my computer from Asus S400 to Dell G3, and that's when the problem started to occured.
This is the first time I using vensimPLE in my new computer.
After I finish editing a model, then I saved and shut down my computer. After a while, I wanted to continue to work on my model, but when I open my last saved file it was blank. Similar condition to when we open new model in vensim. There is no variable, time step was not set yet, and no graphic that I was made before. It was strange, because from file size, I know that file still contained model information from my last work. Even, when I opened .mdl in text editor, the equation is still there.
In desperation, I tried to restart, uninstall and install vensim again. But the result still same. Right now I'm stuck. Any advice? Please help me.
Thank you in advanced
Details: VensimPLE 7.2a (single precision) running on windows 10
I have been working long time to generate a model. This model have been saved into several different versions (increment change in each model). I always back up my file in google drive stream, and have no problem. Recently I changed my computer from Asus S400 to Dell G3, and that's when the problem started to occured.
This is the first time I using vensimPLE in my new computer.
After I finish editing a model, then I saved and shut down my computer. After a while, I wanted to continue to work on my model, but when I open my last saved file it was blank. Similar condition to when we open new model in vensim. There is no variable, time step was not set yet, and no graphic that I was made before. It was strange, because from file size, I know that file still contained model information from my last work. Even, when I opened .mdl in text editor, the equation is still there.
In desperation, I tried to restart, uninstall and install vensim again. But the result still same. Right now I'm stuck. Any advice? Please help me.
Thank you in advanced
Details: VensimPLE 7.2a (single precision) running on windows 10
- Attachments
-
- SFD Smelter 6 Cu Cek.mdl
- (43.38 KiB) Downloaded 181 times
-
- Super Administrator
- Posts: 4573
- Joined: Wed Mar 05, 2003 3:10 am
Re: Strange Problem: Missing Model
Can you let me know which edition of Windows 10 you are using?
Advice to posters seeking help (it really helps us to help you)
http://www.ventanasystems.co.uk/forum/v ... f=2&t=4391
Units are important!
http://www.bbc.co.uk/news/magazine-27509559
http://www.ventanasystems.co.uk/forum/v ... f=2&t=4391
Units are important!
http://www.bbc.co.uk/news/magazine-27509559
-
- Junior Member
- Posts: 8
- Joined: Sun Sep 02, 2018 4:03 am
- Vensim version: PLE
Re: Strange Problem: Missing Model
Thank you for the reply.
I'm using Microsoft Windows 10 Home Single Language 64-bit
Version 10.0.16299 Build 16299
I'm using Microsoft Windows 10 Home Single Language 64-bit
Version 10.0.16299 Build 16299
-
- Super Administrator
- Posts: 4573
- Joined: Wed Mar 05, 2003 3:10 am
Re: Strange Problem: Missing Model
ok. I was hoping it was the enterprise version of Windows.
Can you try creating a shortcut as detailed in the attachment? The INI file for Vensim PLE is venple.ini (not vensim.ini).
Can you try creating a shortcut as detailed in the attachment? The INI file for Vensim PLE is venple.ini (not vensim.ini).
- Attachments
-
- Vensim shortcut instructions.docx
- (421.91 KiB) Downloaded 186 times
Advice to posters seeking help (it really helps us to help you)
http://www.ventanasystems.co.uk/forum/v ... f=2&t=4391
Units are important!
http://www.bbc.co.uk/news/magazine-27509559
http://www.ventanasystems.co.uk/forum/v ... f=2&t=4391
Units are important!
http://www.bbc.co.uk/news/magazine-27509559
-
- Junior Member
- Posts: 8
- Joined: Sun Sep 02, 2018 4:03 am
- Vensim version: PLE
Re: Strange Problem: Missing Model
I've tried what you have suggested.
I was okay in opening older model
But, when I opened my last saved file (the one that I sent) it still give me blank model (picture attached).
I was okay in opening older model
But, when I opened my last saved file (the one that I sent) it still give me blank model (picture attached).
- Attachments
-
- blank model
- vensim4.PNG (125.17 KiB) Viewed 5860 times
-
- .ini file and vensim PLE shortcut in my document folder
- vensim3.PNG (72.59 KiB) Viewed 5860 times
-
- Edited shortcut target
- vensim2.PNG (18.65 KiB) Viewed 5860 times
-
- Super Administrator
- Posts: 4573
- Joined: Wed Mar 05, 2003 3:10 am
Re: Strange Problem: Missing Model
Did you double click the model, or click File->Open in Vensim?marco_savoia wrote: ↑Mon Sep 03, 2018 2:55 pm I've tried what you have suggested.
I was okay in opening older model
But, when I opened my last saved file (the one that I sent) it still give me blank model (picture attached).
Advice to posters seeking help (it really helps us to help you)
http://www.ventanasystems.co.uk/forum/v ... f=2&t=4391
Units are important!
http://www.bbc.co.uk/news/magazine-27509559
http://www.ventanasystems.co.uk/forum/v ... f=2&t=4391
Units are important!
http://www.bbc.co.uk/news/magazine-27509559
-
- Junior Member
- Posts: 8
- Joined: Sun Sep 02, 2018 4:03 am
- Vensim version: PLE
Re: Strange Problem: Missing Model
I tried both. But similar result
Re: Strange Problem: Missing Model
Try moving the file out of the Google Drive hierarchy? Drive causes problems with locked .vdfs, though that shouldn't affect an mdl.
/*
Advice to posters (it really helps us to help you)
http://www.ventanasystems.co.uk/forum/v ... f=2&t=4391
Blog: http://blog.metasd.com
Model library: http://models.metasd.com
Bookmarks: http://delicious.com/tomfid/SystemDynamics
*/
Advice to posters (it really helps us to help you)
http://www.ventanasystems.co.uk/forum/v ... f=2&t=4391
Blog: http://blog.metasd.com
Model library: http://models.metasd.com
Bookmarks: http://delicious.com/tomfid/SystemDynamics
*/
-
- Junior Member
- Posts: 8
- Joined: Sun Sep 02, 2018 4:03 am
- Vensim version: PLE
Re: Strange Problem: Missing Model
Okay, I have moved the model to desktop folder and tried to double click the model and using File -> Open model.
Nothing changed, the model still gave blank page
Nothing changed, the model still gave blank page
-
- Junior Member
- Posts: 8
- Joined: Sun Sep 02, 2018 4:03 am
- Vensim version: PLE
Re: Strange Problem: Missing Model
I have access to vensim DSS in my campus laboratory.
If I opened using vensim DSS, is it gonna solve the problem?
If I opened using vensim DSS, is it gonna solve the problem?
-
- Super Administrator
- Posts: 4573
- Joined: Wed Mar 05, 2003 3:10 am
Re: Strange Problem: Missing Model
Ahh, I think your original model is corrupted. Try this one.
- Attachments
-
- SFD Smelter 6 Cu Cek.mdl
- (43.38 KiB) Downloaded 186 times
Advice to posters seeking help (it really helps us to help you)
http://www.ventanasystems.co.uk/forum/v ... f=2&t=4391
Units are important!
http://www.bbc.co.uk/news/magazine-27509559
http://www.ventanasystems.co.uk/forum/v ... f=2&t=4391
Units are important!
http://www.bbc.co.uk/news/magazine-27509559
-
- Junior Member
- Posts: 8
- Joined: Sun Sep 02, 2018 4:03 am
- Vensim version: PLE
Re: Strange Problem: Missing Model
Thank you very much!!!
It works!
Can you explained to me what was happened?
So I can prevent this situation from happening again
It works!
Can you explained to me what was happened?
So I can prevent this situation from happening again
Re: Strange Problem: Missing Model
Hard to say. I've had problems with both Google Drive and OneDrive syncing back an older version of a file on top of my current work (powerpoint, not Vensim). Could be related.
/*
Advice to posters (it really helps us to help you)
http://www.ventanasystems.co.uk/forum/v ... f=2&t=4391
Blog: http://blog.metasd.com
Model library: http://models.metasd.com
Bookmarks: http://delicious.com/tomfid/SystemDynamics
*/
Advice to posters (it really helps us to help you)
http://www.ventanasystems.co.uk/forum/v ... f=2&t=4391
Blog: http://blog.metasd.com
Model library: http://models.metasd.com
Bookmarks: http://delicious.com/tomfid/SystemDynamics
*/
-
- Junior Member
- Posts: 8
- Joined: Sun Sep 02, 2018 4:03 am
- Vensim version: PLE
Re: Strange Problem: Missing Model
Okay, thank you for your help.
I have take my file off from google drive synchronization
I have take my file off from google drive synchronization