Ventana software support forum

Dears

It seems a simple issue but I could not find the solution.

I am trying to scaling my x-axis annually, setting from 2000 to 2030.
Basically I performed the following actions:

In Control Panel in Scaling I set:

Scaling:
Setting Horizontal Division = 30
Marking Add line at 0
Marking Add line at 1

In Time Axis I set:
Time base: time
Start time: 2000
Special Time: 2030
End Time: 2030

Then I ran the model and clicked on graph button...
The x-division came out as a following:
2000 - 2002 - 2004 - ...2030, instead of 2000 - 2001 - 2002 - 2003 - ...2003... In other words, year by year....

Hence, in my attempting to to solve that "problem" I went to Graph windows in Control Panel and start do set a new graph with X-min = 2000, X-max = 2030 and X-Division = 30. However, I did not succeed either...
Somebody have some suggestion how I could set my graph with year by year displayed in the sketch...

Thanks for the attention.

Claudio

The control panel settings for horizontal division apply to the strip graph, not the graph. Use a custom graph, with your settings. You will get a vertical line every year, but not every one will be labeled.

Thanks Bob!