Scaling - Displayng graph divisions...

[CLAUDIO]

Dears

It seems a simple issue but I could not find the solution.

I am trying to scaling my x-axis annually, setting from 2000 to 2030.
Basically I performed the following actions:

In Control Panel in Scaling I set:

Scaling:
Setting Horizontal Division = 30
Marking Add line at 0
Marking Add line at 1

In Time Axis I set:
Time base: time
Start time: 2000
Special Time: 2030
End Time: 2030

Then I ran the model and clicked on graph button...
The x-division came out as a following:
2000 - 2002 - 2004 - ...2030, instead of 2000 - 2001 - 2002 - 2003 - ...2003... In other words, year by year....

Hence, in my attempting to to solve that "problem" I went to Graph windows in Control Panel and start do set a new graph with X-min = 2000, X-max = 2030 and X-Division = 30. However, I did not succeed either...
Somebody have some suggestion how I could set my graph with year by year displayed in the sketch...

Thanks for the attention.

Claudio

[bob@vensim.com]

The control panel settings for horizontal division apply to the strip graph, not the graph. Use a custom graph, with your settings. You will get a vertical line every year, but not every one will be labeled.

[CLAUDIO]

Thanks Bob!